FUEL SYSTEM PARTS

PLASTIC 'INLINE' FILTER Disposable fuel filter with universal 'tails', suitable for rubber pipe with 6mm or 8mm INTERNAL diameter. Those filters are perfect for trapping large particles such as: rust flakes, paint flakes, metal swarf, heavy dirt before it reaches the lift pump or main fuel filter. Once the filter is full simply remove and refit a new one. Must be situated in the supply pipe before the lift pump (if fitted). PLEASE NOTE: NOT SUITABLE FOR VEHICLES WITH COMMON RAIL INJECTION, OR WITH AN ELECTRIC SUPPLY PUMP. £6.00 each Quantity: View Trolley

'INLINE' 1 WAY VALVE (OR CHECK VALVE) These alloy bodied valves prevent fuel running back to the fuel tank. They are ideally situated between the main fuel filter and the injection pump so as to prevent dirt entering the valve. Available to suit various rubber pipe sizes. For 6mm INTERNAL diameter pipe - £3.00 each Quantity: View Trolley For 8mm INTERNAL diameter pipe - £3.95 each Quantity: View Trolley For 10mm INTERNAL diameter pipe - £4.25 each Quantity: View Trolley For 12mm INTERNAL diameter pipe - £4.75 each Quantity: View Trolley

WATER TRAP / SEDIMENTER Must have item for vehicles using fuel that is not guaranteed as being 100% clean! This deice causes the fuel to swirl as it passes through which causes water and other nasties to drop into the collection chamber where they can be drained away Comes with pipe tails suitable for rubber hose with 8mm INTERNAL diamter. £38.00 each Quantity: View Trolley

UNIVERSAL FILTER ASSEMBLY Can be added to virtually any fuel system as a pre-filter to the standard filter fitted by the manufacturer. Ideal when using bio/veg oil for extra protection. Also suitable to use alone or to replace the standard filter assembly. (NOT Suitable to be used alone on common rail or PD injection systems) C/w 8mm male fittings. Fuel filter included. 2 options available depending upon if the filter assembly is under vacuum (i.e. Fuels being sucked through it) or under pressure (i.e. Fuel is being pushed through it by supply or lift pump). ENSURE YOU ORDER THE CORRECT TYPE Under Vacuum £38.00 Quantity: View Trolley Pressure Supplied £38.00 Quantity: View Trolley

UNIVERSAL MAIN FILTER Useful fuel filter for retro fitment or for additional filtration. Filters down to 5 micron and has water drain tap on the bottom. Simple fuel in/fuel out design (no messing with return/backleak connections) Performed metal tails for 8mm INTERNAL rubber hose Overall height is 171mm, overall diameter is 90.2mm Offers very good filtration but not good enough to be used solely on a common rail or EUI/PD injection system. £16.00 each Quantity: View Trolley

CARTRIDGE FILTER FOR PRESSURE SYSTEM (For universal filter assembly) Very high quality fuel filter with unrivaled filtration properties. £4.50 each Quantity: View Trolley

CARTRIDGE FILTER FOR VACUUM SYSTEM (For universal filter assembly) Very high quality fuel filter with unrivaled filtration properties. £4.50 each Quantity: View Trolley

UNIVERSAL FUEL PRIMER Useful little item when a fuel system has no priming device to assist with bleeding the fuel after a filter change or other work on the fuel system has been done. Saves your battery and starter motor as bleeding takes seconds, far better than constant boost starting! To fit, insert into the fuel supply pipe AFTER the fuel filter by cutting the pipe. A few squeezes of the primer and the fuel system is pressurised up and ready to start the engine. Also acts as a non return valve as it contains check valves. Note: Not suitable where there is an electric supply pump of lift pump. Available for various pipe sizes (x2 pipe clips included): 6mm Inside diameter £8.00 Quantity: View Trolley 8mm Inside diameter £10.00 Quantity: View Trolley 10mm Inside diameter £12.00 Quantity: View Trolley

HEAVY DUTY INLINE FILTER Robust filter for fitting prior to the lift pump or main filter. Ideal for catching heavy dirt such as metal swarf, paint, rust particles etc. Once the filter is clogged this filter can be opened up, cleaned out and re-assembled to use again and again. Can also withstand electric supply pump pressures (suitable for use on common rail engines). Suitable only for pipe with an 8mm internal bore. £14.00 each Quantity: View Trolley

PIPE ADAPTORS Alloy bodies pipe adaptors, handy to change bore sizes of pipe. 6mm to 8mm £4.00 Quantity: View Trolley 6mm to 10mm £4.00 Quantity: View Trolley 8mm to 10mm £4.00 Quantity: View Trolley

UNIVERSAL RUBBER HOSE Excellent quality rubber hose suitable for virtually all oils, proving very good at tolerating bio and veg oils as we have had no leaks since using this hose in 2 years Sold in 2 metre lenghts: 'Leak off' pipe (or spill pipe) £4.00 Quantity: View Trolley 6mm inside diameter £4.00 Quantity: View Trolley 8mm inside diameter £5.00 Quantity: View Trolley 10mm inside diameter £6.00 Quantity: View Trolley

For longer length please contact us.

DIESEL PUMP SEAL KITS We can supply complete seal kits for various injection pumps, these kits are original items or are very good non genuine items. Kits include drive seal(s). Note: we do not supply heavy duty seal kits for veg/bio fuel, veg oil/bio kits are supplied and fitted by us only when we receive the injection pump. Kit for DPA pump £15.00 Quantity: View Trolley Kit for DPC/DPCN pump £35.00 Quantity: View Trolley Kit for Epic pump £35.00 Quantity: View Trolley MEGA Kit for Bosch type VE pump (Contains seals for every VE pump version) £38.00 Quantity: View Trolley

Some other kits are available. Please contact us.