FUEL SYSTEM PARTS

This page is dedicated to consumable items and filtration components.

All parts are suitable for use with red diesel, white diesel, bio-diesel and all vegetable oils.

We try to keep all items in stock, those that are out of stock will be sent within 7 days of an order being placed.


Prices EXCLUDE VAT and INCLUDE U.K. Postage.

PLASTIC 'INLINE' FILTER

PLASTIC 'INLINE' FILTER

Disposable fuel filter with universal 'tails', suitable for rubber pipe with 6mm or 8mm INTERNAL diameter.

Those filters are perfect for trapping large particles such as: rust flakes, paint flakes, metal swarf, heavy dirt before it reaches the lift pump or main fuel filter. Once the filter is full simply remove and refit a new one. Must be situated in the supply pipe before the lift pump (if fitted).
PLEASE NOTE: NOT SUITABLE FOR VEHICLES WITH COMMON RAIL INJECTION, OR WITH AN ELECTRIC SUPPLY PUMP.


£6.00 each Quantity:View Trolley

'INLINE' 1 WAY VALVE (OR CHECK VALVE)

PLASTIC 'INLINE' FILTER

'INLINE' 1 WAY VALVE (OR CHECK VALVE)

These alloy bodied valves prevent fuel running back to the fuel tank. They are ideally situated between the main fuel filter and the injection pump so as to prevent dirt entering the valve.

Available to suit various rubber pipe sizes.


For 6mm INTERNAL diameter pipe - £3.00 each
Quantity:View Trolley

For 8mm INTERNAL diameter pipe - £3.95 each
Quantity:View Trolley

For 10mm INTERNAL diameter pipe - £4.25 each
Quantity:View Trolley

For 12mm INTERNAL diameter pipe - £4.75 each
Quantity:View Trolley

WATER TRAP / SEDIMENTER

WATER TRAP / SEDIMENTER

Must have item for vehicles using fuel that is not guaranteed as being 100% clean!

This deice causes the fuel to swirl as it passes through which causes water and other nasties to drop into the collection chamber where they can be drained away

Comes with pipe tails suitable for rubber hose with 8mm INTERNAL diamter.


£38.00 each
Quantity:View Trolley

UNIVERSAL FILTER ASSEMBLY

UNIVERSAL FILTER ASSEMBLY

Can be added to virtually any fuel system as a pre-filter to the standard filter fitted by the manufacturer. Ideal when using bio/veg oil for extra protection. Also suitable to use alone or to replace the standard filter assembly.
(NOT Suitable to be used alone on common rail or PD injection systems)
C/w 8mm male fittings. Fuel filter included.
2 options available depending upon if the filter assembly is under vacuum (i.e. Fuels being sucked through it) or under pressure (i.e. Fuel is being pushed through it by supply or lift pump).
ENSURE YOU ORDER THE CORRECT TYPE


Under Vacuum - £38.00
Quantity:View Trolley

Pressure Supplied - £38.00
Quantity:View Trolley

UNIVERSAL MAIN FILTER

UNIVERSAL MAIN FILTER

Useful fuel filter for retro fitment or for additional filtration.

Filters down to 5 micron and has water drain tap on the bottom.

Simple fuel in/fuel out design
(no messing with return/backleak connections)

Performed metal tails for 8mm INTERNAL rubber hose

Overall height is 171mm, overall diameter is 90.2mm

Offers very good filtration but not good enough to be used solely on a common rail or EUI/PD injection system.


£16.00 each
Quantity:View Trolley

CARTRIDGE FILTER FOR PRESSURE SYSTEM - (For universal filter assembly)

CARTRIDGE FILTER FOR PRESSURE SYSTEM<BR>(For universal filter assembly)

Very high quality fuel filter with unrivaled filtration properties.


£4.50 each
Quantity:View Trolley

CARTRIDGE FILTER FOR VACUUM SYSTEM
(For universal filter assembly)

CARTRIDGE FILTER FOR VACUUM SYSTEM<BR>(For universal filter assembly)

Very high quality fuel filter with unrivaled filtration properties.


£4.50 each
Quantity:
View Trolley

UNIVERSAL FUEL PRIMER

UNIVERSAL FUEL PRIMER

Useful little item when a fuel system has no priming device to assist with bleeding the fuel after a filter change or other work on the fuel system has been done.
Saves your battery and starter motor as bleeding takes seconds, far better than constant boost starting!
To fit, insert into the fuel supply pipe AFTER the fuel filter by cutting the pipe. A few squeezes of the primer and the fuel system is pressurised up and ready to start the engine.
Also acts as a non return valve as it contains check valves.
Note: Not suitable where there is an electric supply pump of lift pump.

Available for various pipe sizes (x2 pipe clips included):


6mm Inside diameter
£8.00
Quantity:View Trolley

8mm Inside diameter
£10.00
Quantity:View Trolley

10mm Inside diameter
£12.00
Quantity:View Trolley

HEAVY DUTY INLINE FILTER

HEAVY DUTY INLINE FILTER

Robust filter for fitting prior to the lift pump or main filter. Ideal for catching heavy dirt such as metal swarf, paint, rust particles etc. Once the filter is clogged this filter can be opened up, cleaned out and re-assembled to use again and again.
Can also withstand electric supply pump pressures (suitable for use on common rail engines).
Suitable only for pipe with an 8mm internal bore.


£14.00 each
Quantity:

View Trolley

PIPE ADAPTORS

PIPE ADAPTORS

Alloy bodies pipe adaptors, handy to change bore sizes of pipe.


6mm to 8mm
£4.00
Quantity:View Trolley

6mm to 10mm
£4.00
Quantity:View Trolley

8mm to 10mm
£4.00
Quantity:View Trolley

UNIVERSAL RUBBER HOSE

UNIVERSAL RUBBER HOSE

Excellent quality rubber hose suitable for virtually all oils, proving very good at tolerating bio and veg oils as we have had no leaks since using this hose in 2 years

Sold in 2 metre lenghts:


'Leak off' pipe (or spill pipe)
£4.00
Quantity:View Trolley

6mm inside diameter
£4.00
Quantity:View Trolley

8mm inside diameter
£5.00
Quantity:View Trolley

10mm inside diameter
£6.00
Quantity:View Trolley

For longer length please contact us.

DIESEL PUMP SEAL KITS

DIESEL PUMP SEAL KITS

We can supply complete seal kits for various injection pumps, these kits are original items or are very good non genuine items. Kits include drive seal(s).
Note: we do not supply heavy duty seal kits for veg/bio fuel, veg oil/bio kits are supplied and fitted by us only when we receive the injection pump.


Kit for DPA pump
£15.00

Quantity:View Trolley

Kit for DPC/DPCN pump
£35.00

Quantity:View Trolley

Kit for Epic pump
£35.00

Quantity:View Trolley

MEGA Kit for Bosch type VE pump
(Contains seals for every VE pump version)
£38.00

Quantity:View Trolley

EDC kit for Bosch & Zexel rotary injection pump
£28.00

These pumps are found on:
BMW 318/325/525 1996 - 2000
RangeRover 2.5
Omega 2.5
Mitsubishi 2.5 TD (2000-2005)

Note: No seal is provided for where the black plastic 'box' connects to the top section of the pump, this seal is not renewable.
Quantity:View Trolley

Mercedes CP1 kit
£35.00

Full service kit with extra strong seals (far stronger than original items)

This pump is found on:
Mercedes CDI
Cherokee CRD
1.3 CDTI Fiat / Vauxhall
Quantity:View Trolley

Peugeot / Citreon / BMW / Range & Land Rover / Iveco CP1 kit
£35.00

Full service kit with extra strong seals (far stronger than original items)

Quantity:View Trolley

Some other kits are available. Please contact us.